Installation
Preparation Materials Needed
- Clean microfibre cloth
- Mild soap solution (optional)
- Spray bottle with water
- Squeegee or credit card
- Level and measuring tape
- Masking tape
- Sharp scissors and utility knife
- Step ladder
Wall Surface Preparation
1. Clean the Wall
- Remove any dust and dirt using a clean microfibre cloth
- For grimy surfaces, use a mild soap solution and water
- Allow the wall to dry completely (minimum 24 hours)
- Ensure there is no peeling paint or wallpaper
2. Check Wall Compatibility
- Ensure walls are smooth and free from heavy texture
- Best surfaces: painted walls, metal, glass, or plastic
- Avoid applying to:
- Fresh paint (wait 30 days after painting)
- Highly textured surfaces
- Porous surfaces
Wall Decal Installation Steps
Step 1: Planning
1. Measure your space carefully
2. Use a level to mark guidelines with masking tape
3. Plan your design layout before removing any backing
Step 2: Test Application
1. Test a small piece in an inconspicuous area
2. Wait 24 hours to ensure good adhesion
3. Check for any wall damage or discolouration
Step 3: Installation
1. Prepare the Decal
- Unroll and lay flat for 24 hours if possible
- Cut into manageable sections if large
- Do not remove backing yet
2. Application Process
- Start from the top for vertical designs
- For large pieces, have someone assist you
- Slowly peel back about 6 inches of backing
- Position the exposed adhesive section
- Gradually remove backing while smoothing with squeegee
- Work from centre outward to remove air bubbles
3. Smoothing Technique
- Use firm, overlapping strokes with squeegee
- Work in small sections
- If bubbles appear, lift gently and reapply
- For stubborn bubbles, prick with pin and smooth
Tips for Success
- Room temperature should be 18-24°C
- Avoid installation in high humidity
- Keep hands clean and dry during installation
- Don't rush - take your time for best results
- Store unused decals in original packaging
- Keep backing paper for potential reuse
Troubleshooting
- Bubbles: Use squeegee to push toward edges
- Won't Stick: Check wall cleanliness and temperature
- Wrinkles: Peel back and reapply slowly
- Edges Lifting: Clean wall and press firmly
- Stretching: Handle material gently during installation